M8 8mm Secondary Clutch Spreader Belt Change REMOVAL Tool For Can-am MAVERICK COMMANDER OUTLANDER RENEGADE ATV’s & SXS’s, Metric Bolt M8 x 1.25 x 70, 12.9CL, Pre oil, Fully threaded
M8 8mm Secondary Clutch Spreader Belt Change REMOVAL Tool For Can-am MAVERICK COMMANDER OUTLANDER RENEGADE ATV’s & SXS’s, Metric Bolt M8 x 1.25 x 70, 12.9CL, Pre oil, Fully threaded
Features: 12.9 CL , Pre oil , Fully threaded
Size: M8x1.25×70 Bolt
Used to open the secondary clutch for many Can-am ATV’s & SXS’s
Will not work with the factory X3 spreader they use a larger bolt.
These 70mm bolts are the PERFECT length (Opens Clutch COMPLETELY but WILL NOT ALLOW OVER THREAD in and Over Stress Clutch Springs)
For CAN AM OUTLANDER/ RENEGADE/ COMMANDER BELT REMOVAL TOOL.
A MUST HAVE FOR BELT/TRANSMISSION SERVICE.
Installation:
THIS BOLT WINDS CLOCKWISE INTO THE ONLY THREADED INSERT ON THE SECONDARY/DRIVEN CLUTCH TO SPREAD APART THE SHEAVES WHILE COMPRESSING THE SPRING FOR EASE OF BELT REMOVAL,
THEN JUST WIND OUT COUNTER CLOCKWISE AFTER BELT IS RE-INSTALLED AS YOU TURN THE SECONDARY/DRIVEN CLUTCH CLOCKWISE FOR INSTALLATION OF THE BELT.
BE SURE TO KEEP BELT IN THE CORRECT ROTATION DIRECTION ( IT WILL BE MARKED).
These 70mm bolts are the PERFECT length (Opens Clutch COMPLETELY but WILL NOT ALLOW OVER THREAD in and Over Stress Clutch Springs).
I have used these bolts for my own Can Am ATV clutches and they work perfectly to install a new drive belt
